Raspberry Pi Compute Module 3 with 8GB eMMC Flash

Description

This auction is for
Compute Module 3+ 8GB
Compute Module 3+/8GB (CM3+/8GB), Raspberry Pi 3 Model B+ in a flexible form factor, with 8GB eMMC Flash
Overview
The CM3+/8GB Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM) as well as an 8GB eMMC Flash device (which is the equivalent of the SD card in the Pi).
This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector. The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because the Pi Foundation has put all the tricky bits onto the Module itself.
CM3+ Features
Broadcom BCM2837B0
Cortex-A53 (ARMv8) 64-bit SoC @ 1.2GHz
1GB RAM
eMMC Flash
CM3+/Lite: None, but brings the SD card interface to the Module pins so a user can wire this up to an eMMC or SD card
CM3+/8GB: 8GB
CM3+/16GB: 16GB
CM3+/32GB: 32GB
200PIN SODIMM connector (35U hard gold plating I/O pins)
48 x GPIO
2 x I2C
2 x SPI
2 x UART
2 x SD/SDIO
(1x SD has been used for eMMC Flash on non-Lite variants)
1 x HDMI 1.3a
1 x USB2 HOST/OTG
1 x DPI (parallel RGB display)
1 x NAND(SMI)
1 x 4-lane CSI Camera Interface (up to 1Gbps per lane)
1 x 2-lane CSI Camera Interface (up to 1Gbps per lane)
1 x 4-lane DSI Display Interface (up to 1Gbps per lane)
1 x 2-lane DSI Display Interface (up to 1Gbps per lane)
Compared to CM1, the CM3+ supports more OS, like Windows 10 (the free IOT-specific version from Microsoft)
Package Contains
Compute Module 3+ 8GB x1
1
Terms & Conditions
Payment:
· Paypay is the only payment method we currently accept. If you want to pay by other way, please contact with us directly.
Shipping:
· All items will be shipped within 48 hours after receiving your payment.
· Please make sure your delivery details are correct,especially the Address,Zip Code and Tel Number.
· Your order will be shipped according to the service you choose, if you choose Standard Shipping, your package will be shipped by epacket/Singapore Post/Deutsche Post/SpeedPak, etc, if you choose Expedited Shipping, your package will be shipped by e-EMS, DHL, Fedex, etc. we will choose the best logistice method for you, all orders can be tracked with a tracking number.
Feedback:
· Your shopping experience is very important to us and our business. We would like to invite you to leave positive feedback on our products and service if you are satisfied with our total service as well as our products,it is also a great way to help others make purchases like yours!
·
If you are unsatisfied with any aspect of our service, please contact us first so we can try to resolve your problem.
Others:
· Any question, you are always welcome to contact with us directly, we will reply you asap.